Allenheath Xone V6 Manuel d'utilisateur télécharger pdf (Page 32)

32 XONE:V6 User Guide

MIC PCB

JP1JP2

Microphone Option Jumper

A plug on jumper sets the option required. Plug across the two

pins to set. Plug on to just one pin to remove. This keeps the

jumper available to be re-used later in the future if needed.

Phantom power 30V phantom power is disabled when JP1

is fitted. This is the factory default setting. Plug the jumper on to

JP2 instead if you wish to turn phantom power on.

WARNING Do not connect unbalanced sources or

cables to the XLR input when phantom power is applied. To

avoid loud clicks always turn the mic level down before

plugging or unplugging phantom powered microphones.

JP1

PHANTOM POWER

JP2

OFF

JP1JP2

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Pas de commentaire

Allenheath Xone V6 Manuel d'utilisateur Page 32